VENOL HARDENING OILS – Venol Motor Oil

VENOL HARDENING OILS

Hardening oils are produced from deeply refined mineral oils enriched with a composition of appropriately selected additives increasing the cooling rate, preventing the formation of varnish and sludge on the surface of hardened parts.
The oils provide:
– good thermal treatment of iron and steel elements
– hardened surface of high purity elements.
The oils are designed for:
– heat treatment of iron and steel elements, especially in closed hardening furnaces with controlled atmosphere, requiring high purity of the surface of hardened components
– heat treatment of iron and steel components, allowing for small geometric deformations at the required and adequate cooling rate.
Ready to be mixed with other branded oils of this kind.

PACKAGES
20L, 60L, 208L, 850KG

PRODUCT TABLE

70
Kinematic Viscosity at 40°C, cSt21
TAN, mg KOH/g0,07
Pour Point °C-21
Flash Point °C210
Cooling rate°C/s> 90
120
Kinematic Viscosity at 40°C, cSt42
TAN, mg KOH/g0,04
Pour Point °C-20
Flash Point °C222
Cooling rate °C/s> 85
170
Kinematic Viscosity at 40°C, cSt215
TAN, mg KOH/g0,01
Pour Point °C-24
Flash Point °C270
Cooling rate °C/s> 85